Sartorius Flexsafe Pro Mixer Drive Unit Instrucciones De Manejo página 54

Transport
1
54 Operating Instructions Flexsafe
12 Transport
12.1 Installing the Transport Lock
If the device needs to be transported, e.g. if it needs to be shipped: The
transport lock must be installed.
The transport lock consists of 2 transport lock screws that were fitted on the
device on delivery.
Personnel:
2 persons, user
Procedure
Hold the device firmly by the handle and push it down in a controlled
t
manner.
Push the device down until the handle is resting on the floor.
t
Have a second person hold the device firmly by the handle, so the device
t
remains in this position during installation.
Unscrew screws (1) and (2), remove them, and save them for use with the
t
device later.
Screw the 2 transport lock screws into the device.
t
While holding the device by the handle, tip it downwards once again in a
t
controlled manner so that it stands on the castors.
CAUTION Risk of injury due to uncontrolled rolling away of the
t
device! Place it on a level surface and secure the brakes. Wear personal
2
protective equipment.
Pro Mixer Drive Unit
®