Sartorius Flexsafe Pro Mixer Drive Unit Instrucciones De Manejo página 42

Operation
Manual mixing
Couple motor
1
Fig. 11: Display [Couple motor] (motor in lower and upper position, example)
Pos . Designation
1 Direction of movement
2 [Raise] button
3 Positioning bar
42 Operating Instructions Flexsafe
8.6 Coupling the Device to the Palletank
Mixing and Impeller
To couple the device to the Palletank
motor, the alignment pins and the distance sensor must be raised.
Access level: Admin
DD.MM.YYYY HH:MM:SS
Lift up the motor by pressing the arrow up
button. Press the button until the motor is
positioned correctly
2
Description
Displays the direction of movement of the motor.
If the [Raise] button is held down: The motor and the associated
components are raised.
Indicates the position of the motor:
− Positioning bar colored black: Current position of the motor.
− Positioning bar up: The motor is being raised.
− Positioning bar in the middle: The motor is currently being raised or
lowered.
− Positioning bar down: The motor is being lowered.
Requirements
The "Couple motor" display appears in the user guide.
WARNING
Risk of crushing due to moving parts!
When coupling the device, the moving parts rise.
Do not reach into the area between the device and the Palletank
t
Mixing while the moving parts are rising.
Ensure that there are no people in the operating area of the device who
t
can reach between the moving parts and Palletank
Pro Mixer Drive Unit
®
for mixing and the impeller: The
®
Manual mixing
Couple motor
Lift up the motor by pressing the arrow up
button. Press the button until the motor is
positioned correctly
3
for
®
Access level: Admin
DD.MM.YYYY HH:MM:SS
for
®
for Mixing.
®