Spark Arresting Screen In Muffler; Checking The Spark Plug - Stihl FS 130 Manual De Instrucciones

Ocultar thumbs Ver también para FS 130:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

English / USA
Spark Arresting Screen in
Muffler
The spark arresting screen is an option
that is not fitted in all machines.
:
If the engine is low on power, check
the spark arresting screen in the
muffler.
:
Wait for muffler to cool down.
:
Move slide control to STOP-O.
:
Remove the screw (1).
3
2
:
Remove the screws (2).
:
Lift away the shroud (3).
42
:
Remove the screw (4).
1
:
Lift spark arresting screen (5) and
pull it out.
:
Clean spark arresting screen if
necessary – if screen is damaged or
coked up, fit a new one.
:
Refit the spark arresting screen.
:
Insert screw and tighten down.
:
Fit the shroud.
2

Checking the Spark Plug

Wrong fuel mix (too much engine oil in
the gasoline), a dirty air filter and
unfavorable running conditions (mostly
at part throttle etc.) affect the condition of
the spark plug. These factors cause
deposits to form on the insulator nose
which may result in trouble in operation.
FS 130, FS 130 R

Hide quick links:

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido