Ferroli ROMEO N RF Manual De Usuario página 74

Note: A low signal level does not indicate poor operation but weakness of the communication signal, probably
due to excessive distance or the presence of obstacles or metal shielding elements between the Remote and
the Bridge.
The following table gives the meaning of the various indications:
Display
Meaning
indication
"RF --"
RFRC not paired with an RFIU base
RFRC paired with an RFIU base but not in sync
"RF 0"
(no communication or base unreachable)
RFRC paired with an RFIU base and in sync
"RF 1"
(communication present or base reachable)
RFRC paired with an RFIU base and in sync
"RF 2"
(communication present or base reachable)
RFRC paired with an RFIU base and in sync
"RF 3"
(communication present or base reachable)
RFRC paired with an RFIU base and in sync
"RF 4"
(communication present or base reachable)
In case of a first pairing ("RF - -"), follow the pairing procedure.
If, on the other hand, the device is already paired and a new pairing is desired, first follow the unpairing procedure
and then the pairing procedure, otherwise press the button
EN
74
code 3542A980 - Rev. 00 - 01/2022
Communication quality
(RF signal)
No signal
No signal
Signal present, poor quality level
Signal present, sufficient quality level
Signal present, good quality level
Signal present, excellent quality level
to exit the procedure.