4.5 Maximum number of daily time bands
The heating program includes 6 daily time bands for the temperature level, numbered from 1 to 6. If necessary,
they can be reduced to a minimum of 2.
1. Press the button for 3 seconds.
2. The display shows parameter CU.
3. Press the button repeatedly until parameter P3 is displayed.
Press the buttons
4. Press any other button to exit the menu.
4.6 Heating minimum temperature
Follow the instructions below to set the heating circuit water minimum value in steps of 1°C.
1. Press the button for 3 seconds.
2. The display shows parameter CU.
3. Press the button repeatedly until parameter P4 is displayed.
Press the buttons
the value will change rapidly.
4. Press any other button to exit the menu.
4.7 System filling
This function manages the operation mode of the electric device for filling the water circuit in certain boiler models.
1. Press the button for 3 seconds.
2. The display shows parameter CU.
EN
86
/
to change the number of daily time bands from 2 to 6.
/
to adjust the parameter in 1°C increments. By keeping the button pressed
code 3542A980 - Rev. 00 - 01/2022