Descargar Imprimir esta página

Stokke Sleepi Manual Del Usuario página 73

Ocultar thumbs Ver también para Sleepi:

Publicidad

all fittings and screws. Fittings and screws should
be checked regularly and retightened as necessary.
Loose screw connections or parts could lead to the
baby trapping a body part, or clothing (e.g. strings,
necklaces, ribbons for babies' dummies, etc.) which
would pose a risk of strangulation.
• Never place the Stokke® Sleepi™ by an open fire or
sources of strong heat such as electric bar fires, gas
fires, etc. due to the risk of fire.
• Do not use the Stokke® Sleepi™ if any part is broken,
torn or missing, and use only spareparts approved
by Stokke®.
• Do not use any accessories or replacement parts not man-
ufactured by Stokke®, this may affect your child's safety.
• Placing additional items in the product may cause
suffocation.
• Do not leave anything in the cot or place the cot close
to another product, which could provide a foothold
or present a danger of suffocation or strangulation,
e.g. strings, blind/curtain cords
• Do not use more than one mattress in the
Stokke® Sleepi™
• This product is only intended for use with 1 child at the time.
• Never use plastic shipping bags or other plastic film as
mattress covers not sold and intended for that purpose.
They can cause suffocation.
• Never use a water mattress with this product.
• If refinishing, use a non-toxic finish specified for chil-
dren's products.
• Ensure the cot is placed at a reasonable distance from
curtains, blinds, heaters and power points.
• Make sure to keep medication, string, elastic, small
toys or small items such as money out of reach from
any position in the cot.
WARNING for Juvenile configuration (open bed)
• When your child is old enough, the side of the Sleepi
bed may be removed for your child to enter and exit
the Sleepi bed on their own. A sign of the child being
ready for this is when he or she starts climbing out of
the bed on their own.
• Do not use the Sleepi Bed with the side removed next
to an adult bed. This product is not a co-sleeper.
• Children are likely to play, bounce and jump in their
sleeping area. Therefore, ensure the Sleepi bed is placed
WARNING
away from furniture, windows, blind cords, curtain
pulls or other strings or cords. Either place the Sleepi
bed right up to a wall, or ensure there is a 300mm / 12
inches gap between the wall and the side of the bed.
UK/IE
IMPORTANT, RETAIN
FOR FUTURE REFERENCE.
READ CAREFULLY!
Safe Sleep
• As soon as your baby comes home, she/he will need a safe
place to sleep. Pediatrics recommends that babies sleep in their
parents' room (but not the same bed) for the first six months or,
ideally, for the first year. Having a sturdy, secure crib or bassinet
for baby is essential.
• To reduce the risk of SIDS (Sudden Infant Death Syndrome),
pediatricians recommend healthy infants be placed on their
backs to sleep, unless otherwise advised by your physician, a
firm mattress with a tight-fitting sheet will be needed as well.
• Keep soft objects and loose bedding away from the infant's
sleep area to reduce the risk of SIDS, suffocation, entrapment,
and strangulation.
Stokke recommends following The American Academy of Pediatrics
recommandations for safe infant sleeping environments: www.
healthychildren.org
Cleaning and maintenance
Stokke® Sleepi™ Mattress (sold separately):
• MATTRESS COVER: Washable at 60°C / 140°F. Stretch while
wet. Do not tumble dry. Dry flat.
• Mattress core: Rinse mattress core with warm water and dry
flat. If your child has an accident, the mattress cover and core
should always be washed.
WOOD:
• Wipe with a clean, damp cloth, wipe off excess water. Stokke
does not recommend any use of detergents. The colour of the
wood may change if exposed to sun.
NORMAL USE:
• Always remove the duvet in the morning and let the bed and
duvet "cool down" and dry up.
• Possible strangulation or entanglement hazard. Never use crib
mattress cover unless it fits securely on crib mattress and wraps
around the mattress corners.
• This mattress may not soak up vomit.
WARNING!
Stokke® Sleepi™ Mini
• WARNING – Stop using the product (Mini) as soon as
the child can sit or kneel or pull itself up.
• Do not let other children play unsupervised near the
Mini.
• Make sure the wheels on the Mini is in locked position
when a child is in it.
Stokke® Sleepi™ Bed
• The mattress base can be adjusted to four different
positions. Ensure the distance from the mattress to the
top of the bed is always at least 30 cm in the highest
position and at least 50 cm in the lowest position. This
level is marked at the cot end ( ). An original mattress
from Stokke ensures a high quality fit.
• The lowest position is the safest and that the base
should always be used in that position as soon as the
baby is old enough to sit up;
• Make sure to keep medication, string, elastic, small
toys or small items such as money out of reach from
any position in the cot.
• To prevent injuries from falls when your child can climb
in and out of the bed by itself, you shall no longer use
the Sleepi™ Bed as a cot. When your child is ready,
you may remove one side of the cot and adjust the
mattress base to the lowest position. Once the cot side
is removed, ensure to also disassemble the wheels.
Recommended mattress size
This product has been manufactured for use with a
mattress which measures 698 mm wide by 1364 mm
long and 84 mm in thickness for Stokke® Sleepi™
Bed and 590 mm wide by 764 mm long and 84 mm
in thickness for Stokke® Sleepi™ Mini, and have
the shape of the Bed/Mini. The width and length
is specified because it is important that the gaps
between the mattress and the sides and ends of the
cot will not exceed 30 mm. This is to minimize the risk
of a child getting entrapped between the side and
the mattress. The thickness of the mattress is specific
to ensure that the depth of the cot is greater than 500
mm with the mattress base in the lowest position to
minimize the risk of a child climbing or falling out of
the product.
Information about your new Stokke® Sleepi™
Mini Mattress and Stokke® Sleepi™ Bed Mattress
(sold separately)
• Make sure the single mesh side of the mattress is facing
downwards
WARNING!
• Do not use this product without reading the instruc-
tions for use first.
• Read these instructions carefully and follow them in
detail to ensure that the safety features of the Mini
and Bed is not compromised.
• Keep the instructions for later use. Save the hex key
for later use. Re-tighten all screws 2-3 weeks after
assembly, and re-tighten regularly.
• When assembling the product, do not tighten the
screws until the whole unit is assembled. Doing this
ensures you the easiest way to assemble.
• Make sure the Stokke® Sleepi™ is placed on a level and
stable surface. After assembly, re-check and tighten
all fittings and screws. Fittings and screws should
be checked regularly and retightened as necessary.
Loose screw connections or parts could lead to the
baby trapping a body part, or clothing (e.g. strings,
necklaces, ribbons for babies' dummies, etc.) which
would pose a risk of strangulation.
• Never place the Stokke® Sleepi™ by an open fire or
sources of strong heat such as electric bar fires, gas
fires, etc. due to the risk of fire.
Stokke® Sleepi™ |
73

Publicidad

loading

Este manual también es adecuado para:

Sleepi serie