KTM 60712929030 Instrucciones De Montaje página 20

5 ASSEMBLY
5.1
8
Assembly
502079-01
502078-01
502080-01
Condition
To mount the back rest, the appropriate topcase (not included) is
required.
–
Drill mounting holes at marked points
an appropriate drill bit.
–
4
Mount speed nut (included) on back rest
–
1
Position back rest of the topcase from the outside.
–
Mount and tighten screws
(included) from the inside.
Guideline
2
Do not fasten screws
may be damaged.
Make sure that all accessory parts and pieces of luggage are
carefully attached.
Check all the screw connections regularly to ensure that they
are tight.
A
on the topcase using
1
(included).
2
(included) with bushings
too tightly otherwise bushings
3
3