Decathlon HB500 Modo De Empleo página 13

corresponds to the relevant adjustment of the derailleur (you can feel whether the pedalling movement
becomes more difficult or easier depending on the direc on given).
6.5 Axle inspec on
Once the wheel has been mounted as shown below and the axle has been screwed in clockwise, pull the wheel
outwards and push it towards the inside of the chair to verify that there is no movement.
6.6 Lights, bell and reflectors inspec on
The front and rear (independent) lights are posi oned on the HB500 in the loca ons shown in the figure
below.One reflector is placed on each wheel as shown below.
DERAILLEUR LEVERS
12