Control Panel - Olimpia splendid SECCOPROF 30 P Instrucciones Para El Uso Y El Mantenimiento

• Leave at least 20cm of free space on both sides and behind the appliance and leave at least 30cm of free space
above it (Fig. 1).
• Remove the tank (7) and uncoil the supply cord (9).
• Correctly reposition the tank (7) in the appliance body.
• Insert the plug in the power socket; the appliance emits a "beep".

1.4 - CONTROL PANEL

ON/OFF key
Press this key to start the appliance.
Press it again to switch the appliance off.
Voltage presence led
This led turns on in green when the appliance is running.
Water tank full led
When the water tank is full, the led turns on in red, the appliance stops and the buzzer sounds
20 times to warn the user.
It is necessary to remove the tank (7) (figure 7) and to empty it.
Correctly reposition the tank in order to restart the appliance.
Timer key
With the appliance electrically powered but not running
press the key "TIMER" to enter the function, then press the key "TIMER" several times to set the delay
time of switching on (from 1 to 24 hours), the led TIMER lights up in green.
When the value set on the display stops flashing, the value is saved and the led switches steady on.
When the set time finishes, the appliance starts working.
To deactivate the function before the appliance start up,set the TIMER time to "00", switch the appliance
on or off.
EN - 12