Publicidad
Idiomas disponibles
Idiomas disponibles
English
20 Inspection and Maintenance
20.1 Inspection and Maintenance Chart
The following maintenance intervals are examples and apply for normal
operating conditions. Actual use and your experience will determine the
frequency of required inspection and maintenance.
Complete Machine
Controls
Fuel Tank
Fuel Pick-Up Body / Filter
Air Filter
Cutting Attachment
Air intake on fan housing
Cylinder fins
Spark arresting screen in muffler
Spacer
Gearbox
1)
STIHL recommends an authorized STIHL servicing dealer
42
Visual inspection
Clean
Check function and condition
1)
Clean
1)
Clean
1)
Replace
Visual inspection
Visual inspection
Check if properly and securely
tightened
Sharpen a metal cutting attachment
Clean
Clean
1)
Check and Clean
Check
Check, if grease is visible on the
drive shaft before mounting a
cutting attachment.
If grease is visible, check gear
1)
lubrication
20 Inspection and Maintenance
X
X
X
X
X
X
X
X
X
X
X
X
X
X
@ 19.1
@ 13.1
X
X
X
X
X
X
0458-838-8601-A
Publicidad
