Publicidad
Idiomas disponibles
Idiomas disponibles
PORTABLE POWER PRODUCT WARRANTY
Doosan Benelux SA, through its distributor, warrants that each item of
equipment manufactured by it and delivered hereunder to the initial
user will be free of defects in material and workmanship for a period
of three (3) months from initial operation or six (6) months from the
date of shipment to the initial user, whichever occurs first.
With respect to the following types of equipment, the warranty
period enumerated below will apply in lieu of the foregoing war-
ranty period.
WARRANTY TOOLS
DOOSAN BENELUX SA warrants to its authorized dealers, who in
turn warrant to the end-user/owner that each new tools will be free
from proven defects in material and workmanship for twelve (12)
months from the date of delivery to the end-user/owner.
Service schedules must be adhered to, documented and genuine
parts / lubricants must be used where applicable. The warranty does
not cover oils and lubricants and latch front head assembly springs
seals dampeners.
During the warranty period, the authorized Doosan Infracore dealer
shall repair or replace, at DOOSAN BENELUX SA option, without
charge for parts and labor of mechanics, any part of the product
which fails because of defects in material or workmanship. The end
user/owner shall provide the authorized Doosan Infracore dealer
with prompt written notice of the defect and allow reasonable time
for replacement or repair. DOOSAN BENELUX SA may, at its option,
request failed parts to be returned to the factory. Transportation of
the product to the authorized Doosan Infracore dealer for warranty
work is the responsibility of the end user/ owner.
The warranty does not apply to trade accessories not manufactured by
DOOSAN BENELUX SA. The owner shall rely solely on the warranty,
if any, of the respective manufacturers thereof. The warranty does
not cover replacement of scheduled service items such as oil, filters,
tune-up parts, and other high wear items. The warranty does not
cover damages resulting from abuse, accidents, alterations, air flow
obstructions, or failure to maintain or use the product according to
the instructions applicable to it.
DOOSAN BENELUX SA EXCLUDES OTHER CONDITIONS,
WARRANTIES OR REPRESENTATIONS OF ALL KINDS,
EXPRESSED OR IMPLIED, STATUTORY OR OTHERWISE (EXCEPT
THAT OF TITLE) INCLUDING ALL IMPLIED WARRANTIES
AND CONDITIONS RELATING TO MERCHANTABILITY,
SATISFACTORY QUALITY AND FITNESS FOR A PARTICULAR
PURPOSE.
CORRECTIONS
BY
DOOSAN
BENELUX
SA
NONCONFORMITIES WHETHER PATENT OR LATENT, IN THE
MANNER AND FOR THE TIME PERIOD PROVIDED ABOVE,
SHALL CONSTITUTE FULFILMENT OF ALL LIABILITIES OF
DOOSAN TRADING LTD FOR SUCH NONCONFORMITIES,
WHETHER BASED ON CONTRACT, WARRANTY, TORT,
NEGLIGENCE, INDEMNITY, STRICT LIABILITY OR OTHERWISE
WITH RESPECT TO OR ARISING OUT OF SUCH PRODUCT.
THE REMEDIES OF THE END-USER/OWNER SET FORTH
UNDER THE PROVISIONS OF THE WARRANTY OUTLINED
ABOVE ARE EXCLUSIVE AND THE TOTAL LIABILITY
OF DOOSAN BENELUX SA INCLUDING ANY HOLDING,
SUBSIDIARY, ASSOCIATED OR AFFILIATED COMPANY OR
DISTRIBUTOR WITH RESPECT TO THIS SALE OR THE
PRODUCT AND SERVICE FURNISHED HEREUNDER IN
CONNECTION WITH THE PERFORMANCE OR BREACH
THEREOF, OR FROM DELIVERY, INSTALLATION, REPAIR
OR TECHNICAL DIRECTION COVERED BY OR FURNISHED
UNDER THIS SALE, WHETHER BASED ON CONTRACT,
WARRANTY, TORT, NEGLIGENCE, INDEMNITY, STRICT
LIABILITY OR OTHERWISE SHALL NOT EXCEED THE
PURCHASE PRICE OF THE PRODUCT UPON WHICH SUCH
LIABILITY IS BASED.
DOOSAN BENELUX SA INCLUDING ANY HOLDING,
SUBSIDIARY, ASSOCIATED OR AFFILIATED COMPANY AND
DISTRIBUTOR SHALL IN NO EVENT BE LIABLE TO THE
END-USER/OWNER, ANY SUCCESSORS IN INTEREST OR ANY
BENEFICIARY OR ASSIGNEE RELATING TO THIS SALE FOR
ANY CONSEQUENTIAL, INCIDENTAL, INDIRECT, SPECIAL
OR PUNITIVE DAMAGES ARISING OUT OF THIS SALE OR BY
ANY BREACH THEREOF, OR ANY DEFECT IN, OR FAILURE OF,
OR MALFUNCTION OF THE PRODUCT UNDER THIS SALE,
WHETHER BASED UPON LOSS OF USE, LOST PROFITS OR
REVENUE, INTEREST, LOST GOODWILL, WORK STOPPAGE,
IMPAIRMENT OF OTHER GOODS, LOSS BY REASON OF
SHUTDOWN OR NON-OPERATION, INCREASED EXPENSES
OF OPERATION OR CLAIMS OF USER OR CUSTOMERS OF THE
USER FOR SERVICE INTERRUPTION WHETHER OR NOT SUCH
LOSS OR DAMAGE IS BASED ON CONTRACT, WARRANTY,
TORT, NEGLIGENCE, INDEMNITY, STRICT LIABILITY OR
OTHERWISE.
I. 1. Construction Tools,
(Portable Power range only) – Twelve months from shipment
to initial user. Doosan Benelux SA will provide a new part or
repaired part, at it's sole discretion, in place of any part which
is found to be defective in material or workmanship during
the period described above. Labour cost to replace the part
is the responsibility of the initial user.
2. Construction Tools Limited Extended Warranty, (Portable
Power range only) – Thirty-six (36) months from shipment to
initial user. This extended warranty is automatically available
only when the tool is registered with Doosan Benelux SA by
completing and submitting the Warranty Registration form.
Doosan Benelux SA will provide a new part or repaired part,
at it's sole discretion, in place of any part which is found to
be defective in material or workmanship during the period
described above. Labour cost to replace the part is the respon-
sibility of the initial user.
J.
Spare Parts – Six (6) months from date of shipment to the
initial user. Doosan Benelux SA will provide a new part or
repaired part, at its sole discretion, in place of any part that is
found to be defective in material and workmanship during the
period described above. Such parts will be repaired or replaced
without charge to the initial user during normal working hours
at the place of business of an Doosan Benelux SA distributor
OF
authorised to sell the type of equipment involved or other
establishment authorised by Doosan Benelux SA. User must
present proof of purchase at the time of exercising warranty.
The above warranties do not apply to failures occurring as a
result of abuse; misuse, negligent repairs, corrosion, erosion
and normal wear and tear, alterations or modifications made
to the product without express written consent of Doosan
Benelux SA; or failure to follow the recommended operating
practices and maintenance procedures as provided in the
products operating and maintenance publications.
Accessories or equipment furnished by Doosan Benelux SA, but
manufactured by others, including, but not limited to, engines, tires,
batteries, engine electrical equipment, hydraulic transmissions, car-
riers, shall carry only the manufacturers warranty, which Doosan
Benelux SA can lawfully assign to the initial user.
THE ABOVE WARRANTIES ARE IN LIEU OF ALL OTHER
WARRANTIES EXPRESSED OR IMPLIED, (EXCEPT THAT TO
TITLE, AND THERE ARE NO WARRANTIES OF MERCHANT
ABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE.
Models represented in this manual may be used in various locations world-wide. Equpiment shipped within European Union
territories is requied to display a CE mark and conform to various Directives. In these cases, the design specification of the equip-
ment is certified as complying with EC Directives listed. Any modification of the part is absolutely prohibited and would result
in the CE Certification and Marking being rendered invalid. A declaration of that conformity follows:
DECLARATION OF CONFORMITY WITH EC DIRECTIVES
2006/42/EC, 2000/14/EC
Doosan International USA Inc
1293 Glenway Drive
Represented in EC by:
Stateswille, NC 28625
Declare that under our sole responsibility for manufacture and supply, the models
To which this declaration related, is (are) in conformity with the provisions of the directives
using the following principal standards
EN 292-1; EN 292-2; EN 792; EN ISO 3744; ÖN S 5004
Tool serial Number
CONFORMITY TO NOISE DIRECTIVE
2000/14/EC
Doosan Benelux SA Limited declare that the following Pickhammers have been
manufactured in conformity with the directive as shown.
Directive
Machine Model
Weight Range
DCT2PS
2.6 kg
2000/14/EC
DCT3PS
3.5 kg
Annex VI Part 1
DCT5PS
5 kg
Issued at Dublin
March 2009
We
Doosan Trading Limited
170-175 Lake View Road
Airside Business Park
Swords
Country Dublin
Ireland
DCT2PS,
DCT3PS,
DCT5PS
Issued at Dublin on 1–2008
Mr. Peter Edgeller
Technical Manager
Mean Measured
Guaranteed
Notifi ed Body
Value
Level
104 L
105 L
AUVA WIEN
WA
WA
104 L
105 L
AUSTRIA
WA
WA
Nr. 0511
104 L
105 L
WA
WA
Peter Edgeller
Technical Manager
3
GB
Publicidad
