Kingfisher CLCH60LKSS Manual De Instrucciones página 6

WARNING: MEANS
FOR FULL
DISCONNECTION MUST
BE INCORPORATED IN
THE FIXED WIRING IN
ACCORDANCE WITH THE
LOCAL WIRING
INSTALLATION RULES
FOR YOUR COUNTRY. AN
ALL-POLE
DISCONNECTION SWITCH
HAVING A CONTACT
SEPARATION OF AT
LEAST 3 MM IN ALL
POLES SHOULD BE
CONNECTED DURING
INSTALLATION.
WARNING: WHEN
THE EXTRACTOR
HOOD IS LOCATED
ABOVE AN APPLIANCE,
THE MINIMUM DISTANCE
BETWEEN THE
SUPPORTING SURFACE
FOR THE COOKING
VESSELS ON THE HOB
AND THE LOWEST PART
OF THE HOOD SHALL BE:
GAS HOBS ≥ 760 MM
ELECTRIC HOBS ≥ 650 MM
5059340446189_MNL_IN_V03.indb 5 5059340446189_MNL_IN_V03.indb 5
WARNING: BEFORE
CONNECTING THE
HOOD, CHECK THAT THE
SUPPLIED VOLTAGE AND
FREQUENCY MATCH
WITH THAT INDICATED
ON THE APPLIANCE
RATING PLATE. FAILURE
TO INSTALL THE
APPLIANCE IN
ACCORDANCE WITH
THESE INSTRUCTIONS
MAY RESULT IN A SAFETY
HAZARD. IF IN DOUBT,
ASK FOR ADVICE
INSTORE OR FROM A
QUALIFIED INSTALLER.
WARNING: CONSULT
LOCAL REGULATIONS
REGARDING EXTRACTION
OUTLETS AND ENSURE
THESE ARE COMPLIED
WITH. DO NOT CONNECT
THE HOOD TO A
VENTILATION OR HOT AIR
DUCT CONTAINING
COMBUSTION FUMES
FROM BURNING GAS OR
OTHER FUELS. CONFIRM
THAT ROOM
VENTILATION IS
5
8/6/2022 3:27 PM 8/6/2022 3:27 PM