cecotec DRUMFIT CYCLE 9000 TALOS PRO Manual De Instrucciones página 26

ENGLISH
b. To increase the selected training setting.
- MODE: on standby, press this button to confirm the set values.
- DOWN, press this button:
a. To select the training mode.
b. To decrease the selected training setting.
Settings:
Function Description Display range
TIME Training time 0:00 ~ 99:99
DISTANCE Training distance 0 ~ 99.99
CALORIES Calorie burn 0 ~ 9999
PULSE Heart rate 30 ~ 230
WATT Pedalling rate 0 ~ 999 watts
SPEED Speed per hour 0.0~99.9 km/h
RPM Revolutions per minute 0~999
Training modes
Fig. 9-15
- Connect the adapter to a plug or hold down the RESET button for two seconds. An alarm
will sound for 1 second. The display will show as in figure 9 for 2 seconds.
- The monitor will show some values (Fig. 10) for 1 second before entering standby mode.
Fig. 11
- Now, the resistance level is 1.
- Press the MODE button to select a programme: Manual® BEGINNER® ADVANCE ® SPORTY
® HRC ® WATT.
- Press MODE again to set the time with the UP and DOWN buttons. Fig. 12
- Press MODE again to move to the next setting.
- After selecting distance/calories, press START/STOP to start the exercise and let the
monitor calculate the parameters. Fig. 13-14
- Press UP/DOWN to set the resistance level. Fig. 15
57
Setting range
0:00 ~ 99:00 minutes
0 ~ 99.90 km
0 ~ 9990 cals
0-30 ~ 230
10 ~ 350 watts
-
-
Changing the programme
- Press the START/STOP button in any programme and press RESET to get back to the main
menu.
- MANUAL will flash, press UP to change the programme and confirm the selected
programme by pressing MODE.
- Now, you will be able to set the settings as explained before.
- Press START/STOP to start exercising.
- Press UP/DOWN to set the resistance level.
BEGINNER/ADVANCE/SPORTY functions
Fig. 16-21
- The BEGINNER function is programmed for users who are starting to work out. Fig. 16
- The ADVANCE function is programmed for users with an intermediate level of exercising.
Fig. 17
- The SPORTY function is programmed for users with a high level of exercising. Fig. 18
- Within every programme you can select 4 different modes. To do so, after selecting the
desired programme:
1. Press UP/DOWN to select any of the 4 modes. Fig. 19-21
2. Press MODE to confirm.
3. Press the START/STOP button to start exercising.
4. Press UP/DOWN to set the resistance level.
HRC function
- This function allows you to set heart rate targets. To do so, you have 3 HRC modes (heart
rate control) and a HRC TRG (heart rate control target):
1. HRC 55.
2. HRC 75.
3. HRC 90.
4. The HRC TRG mode controls that you remain within your target beats per minute.
HRC MODE
Fig. 22-24
- Press UP/DOWN to set your age, then the monitor will estimate and show your target heart
rate.
- Press MODE to confirm. Fig. 22
- Press UP/DOWN to set a target time. Fig. 23
- Press the START/STOP button to start exercising. Fig. 24
HRC TRG MODE
Fig. 26-28
- If you select HRC-TRG in the programme, you can set your own heart rate target.
ENGLISH
DRUMFIT CYCLE 9000 TALOS PRO
58