Spencer JACK-E Serie Instrucciones De Uso página 16

1. MODELS
The following basic models may be subject to implementation or change without notice.
MECHANICAL
JACK-E LIFTING TROLLEY
JACK-E 4RG LIFTING TROLLEY
JACK-E 4RG TWIST LIFTING TROLLEY
JACK-E LIFTING TROLLEY W/HANDLES
JACK-E 4RG LIFTING TROLLEY W/HANDLES
JACK-E 4RG TWIST LIFTING TROLLEY W/HANDLES
2. INTENDED USE
The Jack-E and Power Jack E lifting trolleys are hydraulically and electro-actuated lifting machines for lifting and handling coffins, respectively.
3. REFERENCE STANDARDS
As Distributor or End-User of the products manufactured and/or marketed by Spencer Italia S.r.l., users are strictly required to be familiar with the legal provisions in force in
the country of destination of the goods, applicable to the devices to be supplied (including regulations relating to technical specifications and/or safety requirements) and,
therefore, to understand the requirements necessary to ensure compliance of the products themselves with all legal requirements of the territory.
REFERENCE
Dir. 2006/42/EC
4. INTRODUCTION
4.1 USING THE MANUAL
The purpose of this manual is to provide healthcare professionals with the information necessary for safe and appropriate use and maintenance of the device.
Note: The Manual is an integral part of the device and therefore it must be kept for the entire life of the device and must accompany it in any changes of use or ownership. If any
IT
instructions for use for products other than the one received are present, please contact the Manufacturer immediately before use.
Spencer products User Manuals can be downloaded from the site
and reasonable and predictable use are such that it is not necessary to draw up instructions, in addition to the following warnings and indications on the label.
Check the website for updates to this user manual at least every 6 months.
Regardless of your level of experience with similar devices in the past, it is advisable to carefully read and understand the contents of this manual before installing,
EN
operating, or servicing this product.
4.2 DEVICE LABELLING AND TRACEABILITY
Each device is provided with a label, placed on the device itself and/or on the packaging, which contains the Manufacturer's identification data, product, CE marking or serial
DE number (SN). This must never be removed or covered.
The device label contains the following information:
FR
ES
In the event of damage or removal, request a duplicate from the Manufacturer, or else the warranty will be void as the device can no longer be traced.
16
DOCUMENT TITLE
Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery
http://support.spencer.it
ELECTRO-ACTUATED
POWER JACK-E LIFTING TROLLEY
POWER JACK-E 4RG LIFTING TROLLEY
POWER JACK-E 4RG TWIST LIFTING TROLLEY
POWER JACK-E LIFTING TROLLEY W/HANDLES
POWER JACK-E 4RG LIFTING TROLLEY W/HANDLES
POWER JACK-E 4RG TWIST LIFTING TROLLEY W/HANDLES
or by contacting the Manufacturer. Exceptions are those items whose essentiality