Klarstein HAVASIA UV 8 NEO Manual De Instrucciones página 69

Removing the mains plug
Before performing any cleaning or maintenance work, always unplug the power cord
from the outlet.
Note on aggressive solvents or cleaning agents
Do not use aggressive solutions or cleaning agents to clean the outside and rubber
components of the unit. Use only a clean cloth with warm soapy water. To remove
stains or dirt from the surface of the inside, use a damp cloth with a little vinegar or a
detergent specially designed for dishwashers.
If the unit will not be used for a long period of time
It is recommended to run the empty dishwasher through once and then disconnect the
mains plug from the socket, turn off the water supply and leave the dishwasher door
slightly open. This preserves the door seals for longer and prevents odours from forming
inside the dishwasher.
Transporting the unit
Try to always transport the unit in a vertical position. If absolutely necessary, it can be
positioned on its back.
Seals
A major odour-causing factor of odour formation in dishwashers is food residues under
the seals. Therefore, clean the seals regularly with a damp sponge so that no odours can
form.
EN
69