Sony XR-CA300 Manual De Instrucciones página 14

1
Press (PTY) during FM reception.
The current programme type name appears
if the station is transmitting the PTY data.
"- - - - -" appears if the received station is
not an RDS station, or if the RDS data has
not been received.
If the TA function is ON, the unit starts
searching for the next station.
2
Press (PTY) repeatedly until the desired
programme type appears.
The programme types appear in the order
shown in the above table. Note that you
cannot select "NONE" (Not specified) for
searching.
3
Press either side of (SEEK/AMS).
The unit starts searching for a station
broadcasting the selected programme type.
When the unit finds the programme, the
programme type appears again for five
seconds.
"NO" and the programme type appear
alternately for five seconds if the unit
cannot find the programme type. It then
returns to the previously selected station.
14
Downloaded from: https://www.usersmanualguide.com/
Set t ing t he clock
aut om at ically
The CT (Clock Time) data from the RDS
transmission sets the clock automatically.
1
During radio reception, press (SEL) and
(2) simultaneously.
2
Press (2) repeatedly until
"CT-ON" appears.
The clock is set.
In two seconds the normal display
automatically appears.
To cancel t he CT f unct ion
Select "CT-OFF" in step 2.
Notes
• The CT f unct ion may not w ork even t hough an
RDS st at ion is being received.
• There might be a dif f erence bet w een t he t ime
set by t he CT f unct ion and t he act ual t ime.