Automatic Switch-Off; Switch-Off Rinsing; Factory Settings; Statistics And System Menus - melitta LatteSelect Manual De Instrucciones

Care and maintenance

In the menu under Settings > Energy save
mode, you can set the time after which
the appliance should switch to energy
save mode. You can select defined values
between 3 and 240 minutes.
You cannot deactivate energy save mode.
After 4 hours without being operated at
the latest, the appliance switches to energy
save mode.
If the appliance is in energy save mode,
you can wake it up by pressing the "Rotary
Switch" briefly.

7.3 Automatic switch-off

If the appliance is not operated for a long
time, it switches off automatically after a
specified time. You can set both a period
until switch-off and also set a time. The
appliance will switch itself off at the set
time in all cases.
In the menu under Settings > Auto OFF >
OFF after ..., you can set after what time
period the appliance should switch itself
off. You can select defined values between
9 and 480 minutes.
You cannot deactivate the function OFF
after ... . After 8 hours without being oper-
ated at the latest, the appliance switches
off.
In the menu under Settings > Auto OFF >
OFF at ... , you can set the time at which
the appliance should be switched off.
If you want to deactivate the OFF at ...
function, you need to set the time to 00:00.
The function is set to deactivated at the
factory.

7.4 Switch-off rinsing

The appliance performs rinsing when
switched on and off.
In the menu under Settings > Rinse at OFF,
you can deactivate the switch-off rinsing
function or activate it again.
We recommend that you do not perma-
nently deactivate the switch-off rinsing
function.
24

7.5 Factory settings

In the menu under Settings > Factory
settings, you can reset the appliance to
factory settings. In this case, all personal
settings are lost, including the settings in
the My Coffee menu.

7.6 Statistics and System menus

The Statistics menu provides information
on the number of beverages prepared.
The System menu provides information
on the software version. Furthermore, you
have access to the venting function (see
section 9, page 27).

7.7 Grinding fineness

The grinding fineness of the coffee beans
influences the flavour of the coffee. The
finer you set the grinding fineness, the
stronger the coffee.
The grinding fineness has been optimally
set at the factory. Change the grinding
fineness setting at the earliest after about
100 coffee dispensing processes (after
approx. 1 month, depending on coffee
consumption).
You can set the grinding fineness optimally
with the "Grinding fineness adjustment"
lever on the rear side of the appliance.
Do not set the grinding fineness too fine.
The optimum grinding fineness is set when
the coffee flows evenly out of the outlet
producing a fine, dense crema.
8 Care and maintenance
Regular cleaning and maintenance of the
appliance guarantee the consistent high
quality of your beverages.
Attention! Unsuitable cleaning agents
can damage the appliance. Only use the
recommended cleaning agents.

8.1 Cleaning surfaces

Use a soft, damp cloth and a little washing
up liquid to clean the surfaces. Remove
external soiling immediately.