Resetting The Appliance To The Factory Settings; Setting The Grinding Fineness - melitta Purista Serie Manual De Instrucciones

6.7 Resetting the appliance to
the factory settings
The appliance can be reset to the factory
settings. When resetting, your settings
in the functions will be lost. The coffee
strength and quantity stored with the
Favourite coffee function will also be lost.
Requirement: The appliance is ready for
operation.
Press the "Service" button as
1.
well as the "Coffee" direct key for more
than 2 seconds to enter Service
mode 2.
Press the "Service" button
2.
repeatedly until the display for the
Factory settings function appears.
3. Press the "Coffee strength" button
repeatedly until the display of one
coffee bean appears.
Press the "Service" button for
4.
more than 2 seconds to reset the
appliance to the factory settings and
exit the service mode.
6.8 Setting the grinding
fineness
The grinding fineness of the coffee pow-
der influences the flavour of the coffee.
If the grinding fineness is set finer, the
coffee flavour is stronger.
ATTENTION
Very finely ground coffee powder can
clog the brewing unit.
The grinding fineness has been
ƒ
optimally set prior to delivery. Adjust
grinding fineness at the earliest after
about 100 coffees are dispensed (after
approx. 1 month, depending on coffee
consumption).
Do not set the grinding fineness too
ƒ
fine. The grinding fineness is optimally
set when the coffee flows evenly out
of the outlet and a fine, dense crema
appears.
Changing basic settings
Adjust the grinding fineness while the
grinder is running.
Requirement: The appliance is ready for
operation.
Fig. 11: Setting the grinding fineness
1. Open the cover (9). To do this, reach
into the recess on the right of the appli-
ance and pull the cover off sideways.
2. Prepare a coffee.
3. Move the lever (8) to the left or right
while the grinder is running.
To the left = grinding fineness finer
To the right = grinding fineness coarser
4. Insert the cover (9) sideways until it
engages.
8
9
43