Descargar Imprimir esta página

Etac KI Mobility FOCUS CR Manual De Instrucciones Y Garantía página 21

Publicidad

Idiomas disponibles

Idiomas disponibles

IV. WHEELCHAIR USE & CONFIGURATION
I. Angle Adj. Locking Extendable Flip Up Armrest
WARNING: These arms offer only a lock against rotation and are designed to bear a
downward force only. They will remove completely if pulled up on and cannot be used to
lift or otherwise handle the chair. Failure to comply with the instructions above may result
in the armrest accidentally disconnecting from the wheelchair and result in a fall or loss of
control and may cause serious injury or death.
How to Use Your Armrest
1. Flip the Armrest Up
a. Press the release lever (Fig. 4:A) up to release the armrest.
b. Swing the released armrest up.
2. Return the Armrest to Operating Position
a. To return the armrest to the operating position, push the armrest down until the lever clicks
and locks.
J. Swing Away Hangers
WARNING: Ensure the hangers are locked into place before using or riding the wheelchair.
Unlocked hangers during use can cause a fall resulting in serious injury or death.
Avoid tripping or falling during a transfer. Ensure your feet do not get caught in the
space between the footrests and avoid putting weight on the footrests as the chair
may tip forward and cause a fall resulting in a serious injury or death.
How to Use Your Hangers
1. Installation
a. Place swing away pivot saddle into the receiver on the front frame tube with the footrest
facing either inward or outward from the frame (Fig. 5).
b. Rotate the footrest so it aligns with the frame and locks into place in the latch block (Fig.
6).
Fig. 4
Fig. 5
A
20
Fig. 6

Publicidad

loading