Publicidad
Idiomas disponibles
Idiomas disponibles
IV. WHEELCHAIR USE & CONFIGURATION
N. Pro Elevating Leg Rest (Continued)
2. Adjusting the Height of the Calf Pad
a. Loosen nut (Fig. 10:A) using a 10mm wrench.
b. Slide the calf pad arm up or down to the desired location.
c. Retighten the nut.
3. Adjusting the Depth of the Calf Pad
a. Remove the screw (Fig 10:B) and nut (Fig. 10:C) on the calf pad arm using a 5mm Allen
wrench and a 13mm wrench.
b. Pick the desired location based on the four predrilled holes and reinstall the screw and nut.
Fig. 10
4. Adjusting the Length of Footrest
a. Loosen the set screw (Fig. 11:A) with a 4mm Allen wrench.
b. Slide the extension tube in or out to get to the desired length and secure by tightening the
set screw.
Fig. 11
C
A
B
24
A
Publicidad
