Descargar Imprimir esta página

Polaris Scout 42 iQ Manuel Du Propriétaire página 14

Publicidad

Idiomas disponibles

Idiomas disponibles

ENGLISH
7.3
Set Cleaning Mode
1.
From the home screen, select Cleaning Mode
to view and select.
7.4
Remote Control*
Use your mobile device as a remote control.
IMPORTANT
Only use Remote Control when in view of the cleaner.
1.
From the main screen, select the Remote tab.
2.
You can direct the cleaner using the remote
control to help pick up debris.
NOTE: If you experience significant delays between the
app command and cleaner response, you may
have a weak Wi-Fi signal or other connectivity
challenges that interfere with the immediacy of the
remote control functions.
*not available on all models
7.5
Removal from Pool
Depending on the model, you can manually remove
the cleaner from the pool or use the Lift System*
feature in app or on the control box.
The Lift System is designed to assist in retrieving the
robot from the pool. Lift System can be activated at
any time during or after a cleaning cycle.
IMPORTANT
Only use Lift System when in view of the cleaner.
1.
From the home screen, select Lift System
to enter automated procedure.
2.
Use the left and right controls to rotate the
cleaner to face the wall of your choice.
3.
Press the Start Button to drive the cleaner up
the wall it is facing. The cleaner will wait at the
water line to be retrieved.
Page 14
Polaris
NOTE: To stop the procedure at any time, press and
release the button again.
4.
When in reach, grab the cleaner handle and
begin to pull cleaner out of the water. The
cleaner will quickly expel water to allow for
lighter, easier removal.
NOTE: Never lift the cleaner out of the pool by the
floating cable.
*not available on all models
7.6
In-App Error Messages and
Troubleshooting
If an error occurs, cleaning will be interrupted and
the app will display an error message.
The message will display:
• The error code and name
• A brief description of the error
• A set of troubleshooting steps you can take to
resolve the error (if available for the error type)
Tap "Clear Error" when you believe you have fixed
the problem and want to try again or anytime you
want to return to the home screen.
7.7
System Settings
Access System Settings by pressing the gear icon in
the upper right hand corner of the app screen.
Robotic Pool Cleaner | Owner's Manual
®

Publicidad

loading

Este manual también es adecuado para:

Scout 40Scout 20