Britax Willow Guia Del Usuario página 29

Attaching the Child Restraint to the Base
1. Ensure that the base is securely installed.
NOTE: Ensure lower connector storage
compartment lid is secure over lower
connector storage prior to placing child
restraint into the base.
2. Place the child restraint into the base
and press down until a click is heard.
3. Pull up on both sides of the child
restraint to verify attachment.
4. Ensure that the carry handle is in a
locked position and check that the
recline angle is still correct.
Removing the Child Restraint from the Base
Pull up and hold the lever on the back
1.
of the child restraint.
2. Lift the child restraint up from the base
using the carry handle.
27