Publicidad
Idiomas disponibles
Idiomas disponibles
AIR LIFT HINGE ADJUSTMENTS
The Air Lift Hinge on your Konnected Joe is already pre-adjusted for ideal
balance and stability. Follow these instructions for any additional adjustment to
suit your personal preferences.
Caution: Air Lift Hinge under high tension.
KONNECTED JOE HINGE
1 Open the dome of your Konnected Joe grill.
2 Place the 17mm wrench on the nut on top of the spring retainer (see Inset 1).
3 To make the dome easier to raise, rotate the 17mm wrench clockwise as
shown. Remove the wrench and check the dome action for every full rotation of
the nut. If you want the dome to feel heavier, rotate the nut counter-clockwise.
Remove the wrench and check the dome action for every full rotation of the nut.
Do not adjust the nut so that it contacts the nut under the connector (see Inset 1).
HINGE SAFETY INFORMATION
Do not attempt to disassemble the hinge from your grill without the proper
hardware. Only minor adjustments to the weight of the dome should be made.
Air Lift Hinge
Nut under connector
18
Adjustment
nut on spring
retainer
Inset 1
Publicidad
