Cooke & Lewis 5059340127453 Manual Del Usuario página 23

Use
EN Before you start
Switch on the appliance at the switched fused connection unit. The appliance is ready for use.
WARNING: Read the instructions before using the appliance.
Function & Settings
Four-button panel
• To obtain the best results from your cooker hood it is recommended that you leave it switched on for up
to 15 minutes after you have fi nished cooking.
1
1. Light On/Off
2. Fan On/Off and Speed Reduction
3. LED Display
To Set Up For First Use
Ducted Option This is the factory default setting if you are extracting air to the outside.
Recirculation Option
1. Press both speed icons
2. Press the Timer button
3. Press Speed Increase
4. Press the Timer button
seconds.
5. Press and hold both Speed buttons
automatically after five seconds.
General Use
Light On/Off
• Use this control to switch the light on independently of the fan motor and the icon will be red.
• When the fan is in use, and the light is off, the icon will be white but will turn red if the light is then
switched on.
Fan On/Off and Speed Reduction
• Press this icon once to turn on the fan motor at speed 1. All icons will be white and the light icon will be
red if already in use.
• If the motor is on speed 1, pressing and holding this icon for two seconds will turn off the fan motor.
• As above, the light control is independent of this operation.
If the motor is higher than speed 1, this will reduce the fan speed with each press of the icon.
208872_s1_s1_5059340127453_C&L_A5_IM_Easy-V02.indd 22 208872_s1_s1_5059340127453_C&L_A5_IM_Easy-V02.indd 22
2
This is the option to be used with carbon filters.
together for 3 seconds, and all icons will flash.
to enter the Set Up mode. The Timer icon will turn red.
or Speed Reduction
again to confirm the setting and return to the Set Up mode after five
for three seconds to exit Set Up, or this will happen
3 4
4. Speed Increase
5. Timer
to select or .
22
5
20-01-2021 10:31:17 20-01-2021 10:31:17