Festool DOMINO XL DF 700 EQ Manual De Instrucciones página 13

Removing the tool
7
7-6
7-5
7-3
7-2
7-1
7-4
7-6

Lift the unlocking device [7-2] until it audibly
disengages using the open-ended spanner [7-
3] supplied (SW 12).

Separate the motor unit [7-5] from the guide
frame [7-4].

Press and hold the spindle lock [8-1].

Loosen the cutter [8-3] using the open-ended
spanner [8-2] and remove.

Release the spindle lock [8-1].
8-1
8
Inserting the tool
WARNING
Risk of injury

Before inserting a new cutter ensure that the
machine, the guide frame and the guides [7-1]
and [7-6] are clean.

Remove any contamination that may be present.

Only use sharp, undamaged and clean tools.

Press and hold the spindle lock [8-1].

Use the open-ended spanner [8-2] to screw on
the cutter [8-3].

Release the spindle lock [8-1].

Slide the guide frame [7-4] onto the motor unit
[7-5] until it audibly engages.
8-3
8-2
13