Tabla De Contenido; Symbols; Safety Instructions; General Safety Instructions - Festool DOMINO XL DF 700 EQ Manual De Instrucciones

Contents
Symbols................................................ 6
Safety instructions ............................... 6
General safety instructions ................. 6
Technical data ...................................... 8
Intended use ........................................ 8
Functional description ......................... 9
Electronics ........................................... 9
Settings ................................................ 9
Operation.............................................. 14
Working with the machine ................... 16
Service and maintenance .................... 17
Troubleshooting ................................... 19
Accessories .......................................... 19
Environment......................................... 20
Warranty............................................... 20

Symbols

V Volts
Hz Hertz
~ Alternating current

General safety instructions

WARNING! Read all safety warnings and all
instructions. Failure to follow the warnings
and instructions may result in electric shock, fire
and/or serious injury.
Save all warnings and instructions for future ref-
erence.
The term "power tool" in the warnings refers to
your mains-operated (corded) power tool or bat-
tery-operated (cordless) power tool.
1 WORK AREA SAFETY
a. Keep work area clean and well lit. Cluttered and
dark areas invite accidents.
b. Do not operate power tools in explosive atmo-
spheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
6
Diameter
-1
min ; Revolutions or reciprocation per minute
rpm
n speed
n maximal no load speed
0 max
mm millimeter
advise, hint
Class II Construction
Warning of general danger
Risk of electric shock
Read the Operating Instructions/Notes!
Wear ear protection.
Wear a dust mask.
Wear protective gloves.
Burning risks from hot surfaces!
Disconnect from the power supply!

Safety instructions

which may ignite the dust or fumes.
c. Keep children and bystanders away while oper-
ating a power tool. Distractions can cause you to
lose control.
2 ELECTRICAL SAFETY
a. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets
will reduce risk of electric shock.
b. Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of elec-
tric shock if your body is earthed or grounded.
c. Do not expose power tools to rain or wet condi-
tions. Water entering a power tool will increase
the risk of electric shock.
d. Do not abuse the cord. Never use the cord for