Technical Data; Intended Use - Festool DOMINO XL DF 700 EQ Manual De Instrucciones

parts of the power tool "live" and could give the
operator an electric shock.
– Keep hands away from the cutting area. Never
place your hand on the front face of the fence
while the tool is running.
– Only cutters provided by Festool for this pur-
pose may be mounted on the power tool. The
use of other cutters is prohibited due to the in-
creased risk of injury.
– Never use dull or damaged mortising bits. Dull
or damaged mortising bits can cause the tool to
lurch sideways unexpectedly and lead to a loss of
control of the power tool.
– Do not resharpen cutters more than twice. Re-
sharpened cutters may affect the precision of the
cutting results.
– Do not operate the tool if the spring-loaded
fence does not return to its forward rest posi-
tion. The fence covers the mortising bit and pre-
vents accidental contact. If the slides of the fence
do not move freely, have the tool serviced imme-
diately.
– Wait until the power tool stops completely until
placing it down. The tool can become entangled
and lead to a loss of control of the power tool.
Joiner
Power
Speed (no load) n
0
Routing depth
Routing width, max.
Ø cutter, max.
Connecting thread of the drive shaft
Weight (excluding cable)
Safety class
The machine is intended to create DOMINO dowel
connections in hard and soft wood, chipboard, ply-
wood and fibreboard. All applications beyond this
are regarded as unintended use.
The machine is designed and approved for use by
8
WARNING! Various dust created by power
sanding, sawing, grinding, drilling and other
construction activities contains chemicals
known (to the State of California) to cause cancer,
birth defects or other reproductive harm. Some ex-
amples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and
other masonry products, and
• arsenic and chromium from chemicallytreated
lumber.
proved safety equipment, such as dust masks that
are specially designed to filter out microscopic par-
ticles. Wash hands after handling.
TO REDUCE THE RISK OF INJURY, USER MUST
READ INSTRUCTION MANUAL.

Technical data

Intended use

trained persons or specialists only.
The user is liable for improper or non-in-
tended use.
Health hazard by dust
The risk from these exposures
varies, depending on how often
you do this type of work. To re-
duce your exposure to these
chemicals: work in a well ven-
tilated area, and work with ap-
WARNING
16,5 mm + Ø cutter
DF 700 EQ
720 W
21000 rpm
15 - 70 mm
14 mm
M8 x 1
5,2 kg
/II