Amprobe SOLAR-500 Manual De Uso página 33

SOFTWARE OPERATION
Start Executing Program
Step 1: n Start -> All Programs, choose "Solar Analyzer" or click the
shortcut to start executing program.
Step 2: Select the Serial Port connected to Solar Analyzer.
Remark:
1. Click
2. After selecting the correct Serial Port, press
3. Before entering the Application Program of Solar Analyzer, please turn
on PC, Solar Analyzer and properly connect the USB cable so that the
Application Program can automatically set up the correct Serial Port.
4. It is necessary to perform this function only when the Application
Program can't automatically set up the correct Serial Port.
to select the Serial Port connected to Solar Analyzer.
26
to confirm it.