Amprobe SOLAR-500 Manual De Uso página 22

Save Testing Results
When users finish a test (by taking one of the above-mentioned methods;
Auto-scan, Manual-scan or Single Point Test), the testing result can be saved in
the memory of the analyzer.
The procedures of saving testing results:
1. Perform a test by Auto-scan, Manual-scan or Single point test.
2. After the test is finished, press
testing result on display. On the top right display it shows
REC:1 (in reverse video) which means the first record was saved.
WARNING!
�
Please use the application software provided with the Analyzer to read
the saved testing results. (refer to the Software Manual)
(REC) button to save the (present)
15