Amprobe SOLAR-500 Manual De Uso página 23

Clear recorded testing data
Users can clear the recorded testing data in the Analyzer.
The procedures of deleting saved data:
1. Keep pressing
button ) at the same time.
2. After turning on the Analyzer, all the data recorded in the Analyzer
(memory) will be deleted. When the buzzer beeps twice, it means the
record data is already cleared.
WARNING!
�
After performing this CLEAR function, all the recorded data in Analyzer
(memory) will be deleted completely and can not be restored. If it is
necessary to keep the testing data, please use the Application Software
to download and save them before deleting them from the Analyzer.
(refer to the Software Manual)
(REC) button and turn on the Analyzer (i.e. press
16