Ninja Smart Screen CT670V Serie Manual Del Propietário página 11

VACUUM BLENDING WITH
THE SINGLE-SERVE FRESHVAC™ CUP
IMPORTANT: Review all warnings on
pages 4–7 before proceeding.
Vacuum blending recommended
for extractions, smoothies, soups, dips, and
dressings for brighter flavors, vibrant colors,
and improved textures.
Non vacuum blending recommended
for whipped desserts that benefit from
added air and frozen drinks with highly
frozen ingredients for thicker results.
1 Add ingredients to the FreshVac Cup.
DO NOT add ingredients past the MAX
LIQUID line on the cup.
IMPORTANT: Overfilling the cup may
cause harm to the FreshVac Pump
when in use.
2 Place the Pro Extractor Blades® Assembly
on the top of the cup and turn clockwise
to seal.
3 Turn cup upside down so the Flip & Seal
Lid is on top and the bottom of the blade
assembly is flat on the counter.
20
4 To open the Flip & Seal Lid, press and
lift the latch. Set the FreshVac Pump on
top of the FreshVac Tab.
IMPORTANT: Make sure the FreshVac
Tab is dry before using FreshVac Pump.
5 Press the power button on top of the
pump to begin vacuum sealing. The
pump will make a motorized noise and
the light on the pump will illuminate in
white while vacuum sealing is in progress.
You do not need to hold the pump in
place while vacuum sealing.
IMPORTANT: Do not use FreshVac™
Pump after blending, as this could
damage the pump.
TIP: To learn more about the programs that
work with your Single-Serve FreshVac
Cup, refer to page 12.
NOTE: Pre-set programs have pauses
and changes in speed throughout
the cycle.
NOTE: The Smart Screen™ Motor
Base can detect which container is
on the motor base. Only the functions
available for a particular container will
illuminate on the touchscreen.
5 Press the power button on top of the
pump to begin vacuum sealing. The
pump will make a motorized noise and
the light on the pump will illuminate in
white while vacuum sealing is in progress.
You do not need to hold the pump in
place while vacuum sealing.
6 When vacuum sealing is complete, the
pump will shut off automatically and the
green light on the pump will illuminate.
IMPORTANT: Do not use FreshVac™
Pump after blending, as this could
damage the pump.
7 To release the pump from the cup, press
the pump release button on the bottom
front of the pump and lift.
8 Close the Flip & Seal Lid, pressing it until
it clicks into place.
9 To blend ingredients, follow instructions
on the next page. When blending is
complete, pressure must be released
from the cup through the FreshVac™ Tab
before opening the lid. See step 14 on
next page for more information.
10 Place the unplugged motor base on a
clean,dry, level surface such as a
countertop or table. Press downward
on the motor base to adhere the
suction cups to the work surface.
Plug the motor base into a wall outlet.
11 Turn the Single-Serve Cup upside down
and install on the motor base. Align the
tabs on the cup with the slots on the base,
then twist until it clicks into place. Touch
the Power symbol to turn unit on. The
available program buttons will illuminate
and the unit will be ready for use.
12 If using a pre-set program, first select the
program that best suits your recipe. The
pre-set feature will automatically stop the
unit at the end of the program. To pause
the unit at any time, touch the currently
active program a second time. Reference
page 10 for program descriptions.
ninjakitchen.com 21