Publicidad
Idiomas disponibles
Idiomas disponibles
VACUUM BLENDING WITH
THE FRESHVAC™ PITCHER – CONT�
IMPORTANT: Review all warnings on
pages 4–7 before proceeding.
IMPORTANT: As a safety feature, if
the pitcher and lid are not properly
installed, the timer will display "
"
and the motor will be disabled. If this
happens, repeat step 4 on page 14.
When the pitcher and lid are properly
installed, the program buttons will
illuminate steadily, indicating the
appliance is ready for use.
11 When the unit is connected to power
and the container is correctly locked
onto the motor base, touch the Power
symbol to turn unit on. The available
program buttons will illuminate and the
unit will be ready for use.
12 If using a pre-set program, first select
the program that best suits your recipe.
The pre-set feature will automatically
stop the appliance at the end of the
program. To pause the unit at any time,
select the currently active setting a
second time. Reference page 11 for
program descriptions.
16
13 If not using a pre-set program and
ingredients have reached your desired
consistency, stop the appliance by
selecting the manual setting, and
wait for the appliance to come to a
complete stop.
14 When blending is complete, rotate
pitcher counterclockwise to remove
from motor base and place on a level
surface.
The vacuum seal must be released
before opening the pour spout or
removing the lid (see step 15 for more
information).
15 To release the vacuum seal, gently lift
the FreshVac Tab. Air will enter the
pitcher, making it easy to remove the lid.
DO NOT PULL TAB OUT
16a To pour out thinner mixtures, ensure
the lid is locked in place, then open
the pour spout cap.
Fig. 1
Fig. 3
Fig. 4
16b For thicker mixtures that cannot be
emptied through the pour spout,
remove the lid and stacked blade
assembly before pouring. To remove
the lid, press the LID RELEASE
button and lift the handle (Fig. 1).
To remove the blade assembly,
carefully grasp it by the top of the
shaft (Fig. 2). The pitcher can then
be emptied (Fig. 3).
17 Unplug the unit when finished. To
lift the motor base, place your hands
underneath both sides of it and gently
pull the unit up and toward you. Refer
to the Care & Maintenance section for
storing instructions.
ninjakitchen.com
17
Publicidad
