Publicidad
Idiomas disponibles
Idiomas disponibles
8. Remove/Adjust the Drawer
Drawer Removal
Fully extend the drawer.
On the drawer slides, pull the left side release latch up, and push the right side release latch down.
While holding the release latches, support the drawer and pull to disengage from the rails.
Drawer Installation
CAUTION: Risk of personal injury. The drawer can fall if the latches are not properly engaged. Make sure that the
latches are engaged on the drawer.
Fully extend both rails.
Pull the bearing carriage on each cabinet rail toward you.
Align the drawer rails onto the cabinet rails, then close the drawer.
Open and close the drawer to confirm proper operation and confirm that the latches are engaged.
Kohler Co.
Release Latch
11
Bearing Carriage
1384737-2-B
Publicidad
