Descargar Imprimir esta página

Kohler Vanity Instrucciones De Instalación página 3

Ocultar thumbs Ver también para Vanity:

Publicidad

Idiomas disponibles

Idiomas disponibles

Before You Begin
WARNING: Risk of serious or fatal injury. To avoid tipping over, the cabinet must be properly secured to the wall.
CAUTION: Risk of product damage. Do not modify the vanity. Doing so will compromise structural stability.
CAUTION: Risk of personal injury or property damage. The provided lag bolts are intended to be used with
standard thickness drywall and wood studs. If the wall is thicker, longer lag bolts are required (not provided).
Calculate the proper lag bolt length by adding the following: 1-1/2" (38 mm) backing material, plus the wallboard
thickness, plus the back rail thickness. For other wall materials, consult with a professional for appropriate
mounting hardware.
CAUTION: Risk of product damage. Do not sit or stand on the cabinet.
CAUTION: Risk of product damage. Use care when moving the cabinet to avoid impacting, sliding, or side-
loading the legs.
NOTICE: Siliconized acrylic caulk must be used to secure a sink or countertop to the vanity. Do not use 100% silicone
sealant, which will damage the finish of the vanity.
Follow all local plumbing and building codes.
Your product may appear different than the one illustrated. The installation procedure is the same.
Two people should perform this installation.
This vanity is designed to allow most base moldings to pass behind the vanity.
IMPORTANT HEALTH NOTICE
Some of the building materials used in this home (or these building materials) emit formaldehyde. Eye, nose, and throat
irritation, headache, nausea and a variety of asthma-like symptoms, including shortness of breath, have been reported as
a result of formaldehyde exposure. Elderly persons and young children, as well as anyone with a history of asthma,
allergies, or lung problems, may be at greater risk. Research is continuing on the possible long-term effects of exposure to
formaldehyde.
Reduced ventilation may allow formaldehyde and other contaminants to accumulate in the indoor air. High indoor
temperatures and humidity raise formaldehyde levels. When a home is to be located in areas subject to extreme summer
temperatures, an air-conditioning system can be used to control indoor temperature levels. Other means of controlled
mechanical ventilation can be used to reduce levels of formaldehyde and other indoor air contaminants.
If you have any questions regarding the health effects of formaldehyde, consult your doctor or local health department.
Kohler Co.
3
1384737-2-B

Publicidad

loading