Checchi & Magli DUAL 12 GOLD Manual De Uso Y Mantenimiento página 71

Prolonged disuse of the work vehicle
If the work vehicle is not due to be used for long periods,
proceed as follows.
1) Clean the machine thoroughly, taking care to remove
any chemical or fertiliser residues (see "Cleaning the
work vehicle").
2) Check the condition of the all the machine's parts
and replace any that are worn or damaged.
3) Check that the screws are correctly tightened.
4) Grease to all the unpainted parts.
English language
INFORMATION FOR USE
5) Grease the parts that require lubrication (see "Lubri-
cation points diagram").
6) Park the machine carefully on flat ground in a dry
area protected from the weather.
Leave enough room around the work vehicle for the
hitching up and unhitching manoeuvres.
Lower the foot to the ground (if featured) to guarantee
work vehicle stability.
29
6
Use and maintenance