Information and safety signs
Danger - Warning
Check that all the plates are legible; if they are not,
clean them or - if they are damaged - replace them,
applying the new ones in the same place as the old
ones.
UN41 0048CF
A) Hazard plate: read the use and maintenance manual
before using the work vehicle.
B) Hazard plate: switch off the tractor; remove the igni-
tion key and store in a safe place before carrying out
any type of work on the work vehicle.
C) Hazard plate: do not remain on the seat with the
work vehicle lifted off the ground.
Optional accessories
The following chart shows the optional accessories available for installation.
Manual lift row tracers (max. row spacing: 110 cm)
Manual lift row tracers (max. row spacing: 150 cm)
Hydraulic lift row tracers
Continuous flow watering device positioned between the ploughshares BABY COMPACT
Optional kits for distances on the row (31 - 82 cm)
Plant spacing kit 10 - 12 cm
Transversal tray holder additional shelf (200 cm)
Transversal tray holder additional shelf (250 cm)
Transversal tray holder additional shelf (300 cm)
Transversal tray holder additional shelf (350 cm)
Transversal tray holder additional shelf (400 cm)
Hosepipe laying device
BABY COMPACT front flex wheel kit (not compatible with skid)
BABY COMPACT narrow ploughshare kit
BABY COMPACT standard ploughshare kit
BABY COMPACT medium ploughshare kit
Kit of disks in front of the ploughshare (only skid version)
BABY COMPACT semi-cup dispensing unit
English language
TECHNICAL INFORMATION
The illustration shows the locations and meanings of the
applied signs.
B
C
D) Information plate: strap up at the anchor points
shown to lift the work vehicle.
E) Hazard plate: this highlights a risk of hands being
crushed between the dispenser and the dispenser
disc.
F) Plant spacing distance plate: this shows the type of
pinion to fit according to the plant spacing required.
6
A
D
F
2
E
Use and maintenance