Publicidad
Idiomas disponibles
Idiomas disponibles
Replacing the ploughshare
UN41-0361AL
Proceed as outlined below.
1) Move the lever (A) and turn the guide (B) downwards,
if fitted.
2) Remove the circlip (C).
3) Unscrew the wing nut (D).
4) Remove the washer (E).
5) Lift and hold the clamping device (F).
6) Push the ploughshare forwards and turn it so it is fac-
ing downwards.
English language
INFORMATION CONCERNING REPLACEMENTS
7) Hold the ploughshare and remove the screw (G) and
washer (H).
For the assembly, carry out the same operations as for
disassembly but proceeding in reverse order.
Check that the plant control plate is inside the share.
37
B
Information
8
Use and maintenance
Publicidad
