Publicidad
Idiomas disponibles
Idiomas disponibles
All manuals and user guides at all-guides.com
Intended purpose
The bench drill is designed for drilling in
metal, wood, plastic and tiles. Straight
shank drills with a drilling diameter from
1.5 mm to 16 mm can be used.
The device is intended to be used by do-it-
yourselfers. It was not designed for heavy
commercial use.
The tool is not to be used by persons.
under the age of 16. Children over the
age of 16 may use the tool except under
supervision.
The manufacturer is not liable for damage
caused by an improper use or incorrect
operation of this device.
General description
The illustration of the principal
functioning parts can be found
on the front and back foldout
pages.
Extent of the delivery
Carefully unpack the appliance and check
that it is complete. Dispose of the pa-
ckaging material correctly.
- Baseplate
- Drilling bench
- Column tube
- Motor unit
- 3 drill lifting arms
- Safety device
- Drill chuck
- Drill chuck key
- Allen key
- Vice
- 2 x 1.5 V batteries, AAA size
- Mounting material
- Instruction Manual
Description of functions
Please refer to the descriptions below for
information about the operating devices.
Overview
1 Off
switch
A
2 On switch
3 Gear cover
4 Drill chuck
5 Emergency stop switch
6 Safety device
7 Drill spindle
8 Locking screw of the depth stop
9 Hand spindle guide with
3 drill lifting arms
10 Holder for drill chuck key
11 Locking screw for gear cover
12 Retaining screws for motor unit
13 Motor unit
14 Column tube
15 Locking handle
16 3 Assembly screws
17 Baseplate
18 Angle scaling
19 Retaining screw for drilling
bench inclination
20 Drilling bench
21 Depth stop with scale
22 Vice mounting material
23 Vice
24 Chuck jaws
25 Allen key
26 Drill chuck key
27 Clamping screws for motor unit
28 Clamping screw
D
for safety device
29 V-belt
E
30 Spindle-side drive pulley
31 Motor side drive pulley
MT
GB
63
Publicidad
