Operating field
1 Main switch (0 - I)
2 Throwing in the coin
3 Remaining value indicator (optional)
Before Startup
Making the plant ready for
operations
Connect suction hose to the suction de-
vice.
Insert the suction device in the machine
casing, position it and turn in the suction
hose from the side into the casing opening.
Insert the power cord of the suction device
into the socket at the machine casing.
Switch on the vacuum cleaner.
Caution
Always keep the exhaust air cover and the
air supply channel open to protect the ma-
chine against over-heating.
Caution
The flat pleated filter must must always be
in place while vacuuming.
Switch on the machine at the main
switch. The appliance is now ready for
operation.
Automatic filter cleaning
The appliance has an innovative filter dedusting
that is particularly effective with fine dust. The
flat folded filter is automatically cleaned through
an air jet (pulsating sound).
Turning on the Appliance
Note: When the machine is ready for use,
there is a running light display across all the
five segments of the remaining value indi-
cator (optional).
Note: The remaining value is lost if the ma-
chine is switched off at the main switch dur-
ing vacuum cleaning.
Throw in the coin to start the vacuum
cleaner.
The coin slot is open when the vacuum
–
cleaning is on. Coins can be thrown in and
the value gets added up; the vacuum clean-
ing time is increased correspondingly. The
coin slot closes automatically after you
have thrown in four coins.
The appliance switches off on expiry of
–
the set vacuum cleaning time.
– 4
EN
Start up
Operation
19