Kärcher SB V 1 Eco Manual Del Usuario página 28

Install hose recovery (optional)
Install the hose recovery according to
the enclosed assembling instructions.
Setting the recovery force of the cable
Remove the screw on the upper side of
the covering hood of the cable.
Remove covering hood.
Set the recovery force.
Increase the force: Turn the hand-
–
wheel in clockwise direction (+).
Reducing the force: Turn the hand-
–
wheel in an anticlockwise direction (-).
Replace the covering hood and tighten
the screws.
Establish the electrical connection.
Check functioning of the appliance.
Set the vacuum cleaning time accord-
ing to customer requirements.
Connect the cable that you have al-
ready guided through the base plate
opening to the main appliance switch
according to the enclosed circuit plan.
28
Start up
– 13
EN