Sime MURELLE HE 110 R ErP Manual De Instrucciones página 70

3 CHARACTERISTICS
3.1 CONTROL PANEL (fig. 12)
5
1
5
5
5
1
2
1
1
2
5
5
2
2
5
1
2 - DESCRIPTION OF CONTROLS
1
ON/OFF KEYS
ON = Electricity supply to boiler is on
OFF = Electricity supply to boiler is on but nor
2
1
2 ready for functioning. However, the protec-
tion functions are active.
SUMMER MODE KEY
5
When this key is pressed, the boiler functions only
when D.H.W. is requested (function not available)
2
WINTER MODE KEY
3
When this key is pressed, the boiler provides hea-
ting and D.H.W.
D.H.W. TEMP KEY
1
When this key is pressed, the temperature of the
D.H.W. is shown on the display (function not available)
HEATING TEMP KEY
The first time the key is pressed, the temperature of
2
heating circuit 1 is shown.
The second time the key is pressed, the temperatu-
4
re of heating circuit 2 is shown.
The third time the key is pressed, the temperature
of heating circuit 3 is shown (Three zones).
RE-SET KEY
This allows for restoring functioning after a functio-
ning anomaly.
INCREASE AND DECREASE KEY
By pressing this key the set value increases or
decreases.
70
3
3
3
3
4
4
3
4
3
4
3
4
4
4
DESCRIPTION OF DISPLAY ICONS
SUMMER MODE ICON
WINTER MODE ICON
D.H.W. MODE ICON
HEATING MODE ICON
GRADED POWER SCALE
The segments of the bar light up in proportion to boiler
power output .
BURNER FUNCTIONING AND BLOCK ICON
DESCRIPTION OF DISPLAY ICONS
CHIMNEY SWEEP ICON
SECONDARY DIGITS
The boiler visualises the value of the pressure of
the system (correct value is between 1 and 1.5 bar)
MAIN DIGITS
The boiler visualises the values set, the state of
anomaly and the external temperature
INTEGRATIVE SOURCES ICON
3 - KEYS RESERVED FOR THE INSTALLER
(access to INST and OEM parameters)
PC CONNECTION
To be used only with the SIME programming kit and only
by authorised personnel. Do not connect other electronic
devices (cameras, telephones, mp3 players, etc.) Use a
tool to remove the cap and reinsert after use.
ATTENTION: Communication port
sensitive to electrostatic charges.
Before use, it is advisable to touch an
earthed metallic surface to discharge static electricity.
INFORMATION KEY
This key can be pressed several times to view the
parameters.
CHIMNEY SWEEP KEY
This key can be pressed several times to view the
parameters.
DECREASE KEY
This key changes the default settings.
INCREASE KEY
This key changes the default settings.
4 - LUMINOUS BAR
Blue = Functioning
Red = Functioning anomaly
5 - PROGRAMMING CLOCK (optional)
Mechanical clock (code 8092228) or digital clock
(code 8092229) to program heating and water supply.
5
3
1
2
4
Fig. 12