WALTERSCHEID P Serie Manual Del Operador página 38

GB
Overview and function
PTO drive shaft
ECO line
W line
P line
2.5.1 Safety provisions
2.6 Clutch types
NOTE!
For PTO drive shafts between the tractor and the imp, always
install the overload and overrunning clutches on the implement-
side (see image)
WARNING!
Hearing damage as a result of noise!
► Before working in the area of the PTO drive shaft, switch off the drive unit and
secure it against switching back on by removing the key.
Guard variant
SD guard
SD/ST guard
PG guard
1
>50mm
2
36
1
2
>50mm
<150mm