RS Pro RS-988 Manual De Instrucciones página 10

Operating Instruction for Thermal Imager / English
• Lock the low level and adjust the high level of the temperature range:
• Lock the high level and adjust the low level of the temperature range:
6-4-2. Histogram Mode and Auto Mode
• Auto Mode: level and span are decided by the thermal image of minimum temperature and maximum
temperature,The relationship between temperature and color is linear.
• Histgram Mode: the thermal image is enhanced by histogram algorithm, The relationship between
temperature and color is not linear, Some part of the image is enhanced.
• Touch the icon "HG" or "AUTO" below the colorbar to change the mode.
16
Operating Instruction for Thermal Imager / English
6-5.Measurement Menu
1. In main menu, press "Measurement" icon button, highlight "Measurement".
2. Press "Up" button, popup Image submenu which contains 5 kinds of Measurement tools.
3. Press "Left" or "Right" button, or touch the Measurement tools icons, highlight the Measurement tool
which you want to choose.
4. The Measurement tool will be enabled after you choose it.
Center Spot: Measure the center point temperature.
Manual Spot: Measure the manual point temperature, There are three manual analyse points.
Line Analysis: Measure the line temperature, There are two analyse lines, One for horizontal, the
other is vertical line.
Area Analysis: Measure the area temperature, There are three analyse areas.
Hi/Lo Spot Analysis: Capture max/minimum temperature.
Delete all Analyses: Delete all analyse tools.
6-6.Parameter Menu
1. In main menu, press "Up" and "Down" button, highlight "Emiss", press "Select" button, popup object
parameter submenu.
17