RS Pro RS-988 Manual De Instrucciones página 5

Operating Instruction for Thermal Imager / English
5.Before You Start
5-1.How to Charge the Battery
• Before you use the Thermal Imager for the first time, charge the battery for three and three-half hours.
• The battery status shows on the six-segment charge indicator.
• To charge the battery, use follow before:
1. Connect the ac power adapter into an ac wall outlet and connect the dc output to the
Thermal Imager's ac power socket, the charge light is on, The battery indicator becomes "
" while the battery charges with the ac power adapter.
2. Charge until the charge indicator becomes"
3. Disconnect ac power adapter when the battery is full charged.
Note: Make sure that the Thermal Imager is near room temperature before you connect it to the charger.
Do not charge in hot or cold areas. When you charge in extreme temperature, battery capacity may be
decreased.
5-2.Power On
To turn the Thermal Imager on, push the Power/Lock "
Note: After power on the device, the thermal Imager needs sufficient warm-up time for the most accurate
temperature measurements and best image quality. So the visible image will first appear, and the thermal
sensor will calibrate internal for sevearal seconds. After that the thermal image will be displayed on the
screen.
6
", the charge icon not changed.
" Button about 2 seconds.
Operating Instruction for Thermal Imager / English
5-3.Power Off
• When Thermal lmagers power on, Push and hold the Power Lock "
popup the power off menu, press "OK" to power off the device.
• Push and hold the Power/Lock " " Button for twelve seconds, the device will be forced power off
directly
5-4.Desktop
10. Centre Point Temperature Readings
The Desktop is as follow:
11. Video Recording Indicator
1. Temperature Unit
12. AGC Mode Status
2. Distance Unit
13. Max Temperature of Current Scene
3. Emissivity
14. Centre Point Cross
4. Zoom Indicator
15. Value Adjustment for High Alarm
5. SD Card
16. Value Adjustment for Low Alarm
6. Wifi Status
17. AGC Mode Select Button
7. Battery Capacity Status
18. Min Temperature of Current Scene
8. Time
19. Color Bar
9. Main Menu
" Button for two seconds, then
7