RS Pro RS-988 Manual De Instrucciones página 12

Operating Instruction for Thermal Imager / English
6-6-6. Emissivity
• In emissivity submenu, press "Left" and "Right" arrow to change the emissivity values.
• "Emiss" sets object emissivity, the value range is 0.01-1.00.
6-6-7. Alarm mode
OFF: turn off the alarm display and sound.
Above alarm: if the temperature of the object exceeds the above alarm value, there will be alarm sound and
display.
Below alarm: if the temperature of the object below the low alarm value, there will be alarm sound and
display.
6-7.Settings Menu
• In main menu, press "Settings"icon button, highlight "Settings".
• The Settings menu will display.
20
Operating Instruction for Thermal Imager / English
6-7-1.Device Setting
• There are multipages in Device setting, use "
previous page.
Brightness: Drag the slider bar to adjust the LCD brightness.
WiFi
• Press " " " " to turn on the wifi, the wifi
model workedon access mode, so it is need to set the SSD
and Password toallow other device connect to it.
• The default SSID is "xxxxx", the default password is
"12345678".
Time Date: Press " "or " " to change time/date, then
press"Set Date" to save the change, or press "Cancel" to
quit.
" icon to go to next page, or use " " to go to
21