RS Pro RS-988 Manual De Instrucciones página 11

Operating Instruction for Thermal Imager / English
6-6-1.Ambient Temperature Compensation
• In Ambient temperature submenu, press "Left" and "Right" arrow to change the temperature values,
• Ambient temperature will affect the measurement of the thermal imager, it can be composite from 0
degree to 50 degree.
6-6-2.Ref lective Temperature
• In reflective temperature submenu, press "Left" and "Right" arrow to change the temperature values,
• The reflective temperature is important for radiometric temperature measurement, Thermal Imager has
temperature compensation for reflective temperature.
• To get more accurate temperature measurement, accurately set the reflective temperature.
• In most cases, the reflected temperature is identical to the ambient temperature.
• Only when objects with strong emissions with much higher temperature are in the proximity of the object
being measured, the reflected temperature must set.
18
Operating Instruction for Thermal Imager / English
6-6-3.Atmospheric Humidity
• In Atmospheric humidity submenu, press "Left" and "Right" arrow to change the humidity values.
• Water droplets in the air can absorb infrared rays. The wet air can affect the measurement of the
temperature's accurate, the compensation humidity can be set from 10%~100%.
6-6-4.Delta Temperature Compensation
• In delta temperature submenu, press "Left" and "Right" arrow to change the temperature values.
6-6-5.Distance
• In distance submenu, press "Left" and "Right" arrow to change the distance values.
• There are many substances in the air that can absorb infrared rays, so the infrared ray of the object will
decaied as the distance increase.
• The distance can be setted from 2 meter to 1000 meters.
19