EN
34
Connecting and changing the gas cylinder
•
Carry out the changing of the gas cylinder away from any source of ignition.
Position the gas bottle on the left side of your gas grill, it should not be placed
inside the grill. Note that the gas cylinder must be protected from heat and
kept in a safe position.
•
When your gas grill is ready to use, insert the regulator into the gas cylinder
valve and tighten securely.
WARNING
Risk of injury and damage to property! Before attempting to light
your gas grill, read and understand all instructions, warnings, and
safety precautions outlined in this owner's manual.
•
Check the hose for cracks, cuts or abrasions before each use. If the hose is
damaged in any way, do not use your gas grill.
•
When changing the gas bottle, make sure that there are no sources of ignition
nearby, e.g. fi re, cigarettes, open fl ames, etc. Make sure the device is turned
off .
•
The device may only be used with liquid gas cylinders in accordance with the
information in the "Technical Data" section and the gas label shown in these
instructions. The gas cylinder used must comply with national regulations.
OPERATION
Notes on operation
•
After connecting, always check the gas line with soapy water for leaks at the
connection.
•
The top lid must always be open when the burner is lit.
•
Use oven gloves and sturdy, long-handled gas grilling tools when grilling on
the appliance.
•
Be prepared should an accident or fi re occur. You need to know where the fi rst
aid kit and fi re extinguishers are and how to use them.
•
Keep electrical supply cords and fuel supply hose away from all hot surfaces.
•
Always exercise extreme care when grilling.
•
Do not heat unopened glass or metal containers with food on the grill.
Pressure can build up and rupture the container, resulting in serious injury or
damage to the grill.
•
It is recommended that you wear protective gloves when operating the device,
especially when handling particularly hot components.