LUND 67901 Manual De Instrucciones página 14

The button marked "REVERSE" is intended for short engaging of the reverse gear. Press and hold the button in this position. The
auger starts to rotate in the opposite direction, which allows you to clean the inside of the food attachment. Releasing the button
will automatically stop the device.
Use reverse gear when the performance of the machine is reduced. Turning the auger in the opposite direction allows the food to
be withdrawn from the inside of the attachment. Next, start the device again by pressing the ON or HALF button and then grind
the food again. If you still notice a decrease in performance, stop the device operation, disconnect the attachment, disassemble
and manually clean it according to the instructions in the "Product Maintenance" section.
When you have fi nished using the product, turn it off by pressing the STOP & RESET button, then unplug the product's power cord
from the socket and begin maintenance activities on the product.
MAINTENANCE AND STORAGE
CAUTION! Never immerse the drive housing in water or other liquids. This may result in electrical shock and will damage the
product. All components of the attachments can be immersed in water or washed under the jet of water.
Parts of the device which have been in contact with food should be cleaned immediately after use. Dried food residues can clog
the components of the product, which can lead to a loss of performance or even damage the product. If this happens, immerse
these parts which were described as immersible in warm water with dishwashing liquid and leave it to soak, then clean with a
soft sponge or a brush and water with dishwashing liquid. None of the parts of the device is suitable for washing in mechanical
dishwashers. This can lead to the loss of shape, colour and texture of the materials they are made of.
Clean the openings in the juice-squeezing attachment and the grinder attachment strainers with a soft plastic brush. Do not use
sharp objects (including scouring sponges) to clean any part of the product.
Clean the drive housing with a soft cloth dampened with a water and mild detergent solution. Wipe dry. Do not use abrasive
cleaning agents.
Make sure all parts are cleaned and dried before connecting the device to the power supply. Store the product in dry, shaded
conditions. Protect the storage place from unauthorised access, especially by children. Store the product in the unit packaging
provided with the product.
TECHNICAL PARAMETERS
Parameter
Catalogue No.
Rated voltage
Rated frequency
Rated power
Electrical protection class
Weight
O R I G I N A L
14
GB
Measure Unit
[V~]
[Hz]
[W]
[kg]
I N S T R U C T I O N S
Value
67901
220 – 240
50 / 60 Hz
1200
II
4.4