HEBU medical HBS 300i x-touch Instrucciones Para El Uso página 48

EN
8.6 Setting the operating mode and power level
◼
Operating mode
HBS 300i x-touch has four different operating modes for monopolar cutting, four for monopolar
coagulation, two for bipolar cutting and four for bipolar coagulation applications (for details, see chapter
5.2 „Overview of symbols for operating modes and settings"). The selection of all modes takes place
according to the same principle. Touch the field showing the operating modes. The selection menu then
opens.
The required operating modes must be selected by touching. To
save and return to the main menu, select the "Exit" field.
◼
Power setting
To set the required power level, touch the power display. The menu for power level selection appears.
Menu example: Power setting
When the unit is next switched on, the last used settings will appear. If you want to save individual
settings against changes the lock function can be used. For more information about the lock function
see chapter 8.7 and 8.8.
48
Use the arrow keys in order to set the required power setting.
To save and return to the main menu, select the "Exit" field.
Menu example: Selection of operating modes
(MONO1 – PURE CUT)
HBS 300i x-touch