c)
Do not touch the unit with wet or damp hands.
d)
Do not use the cord in an unintended manner. Never use it to carry the unit or
to pull the plug out of the socket. Keep the cord away from heat sources, oil,
sharp edges or moving parts. Damaged or tangled cords increase the risk of
electric shock.
e)
If you cannot avoid using the unit in a wet environment, use a residual current
unit (RCD). Using an RCD reduces the risk of electric shock.
f)
Do not use the unit if the power cord is damaged or shows signs of wear. A
damaged power cord should be replaced by a qualified electrician or the
manufacturer's service department.
g)
To avoid electric shock, do not immerse the cable, plug, or unit itself in water
or other liquid. Do not use the unit on wet surfaces.
h)
CAUTION - THREAT TO LIFE! When cleaning or using the unit, never immerse it
in water or other liquids.
i)
Do not use the unit in rooms with very high humidity / in the immediate vicinity
of water tanks!
2.2.
Safety in the workplace
a)
Keep the work area tidy and well lit. Disorder or poor lighting can lead to
accidents. Be foresighted, watch what you are doing and use common sense
when using the unit.
b)
Do not use the unit in an explosive area, for example in the presence of
flammable liquids, gases or dust. The unit produces sparks that can ignite dust
or fumes.
c)
If you find any damage or irregularities in the operation of the unit,
immediately turn it off and report it to an authorized person.
d)
If you have any doubts as to whether the unit is working properly or if it is
damaged, contact the manufacturer's service department.
e)
Only the manufacturer's service department may repair the unit. Do not carry
out repairs yourself!
f)
In case of open flames or fire, use only dry powder or snow (CO2) fire
extinguishers to extinguish the live equipment.
g)
No children or unauthorized persons are allowed in the work area. (Inattention
may result in loss of control of the unit.)
h)
Check the condition of the safety stickers regularly. Replace them if they are
illegible.
i)
Keep these instructions for use for future reference. If the unit is to be passed
on to a third party, the operating instructions must also be handed over
together with the unit.
j)
Keep the packaging and small assembly parts out of the reach of children.
k)
Keep the unit away from children and animals.